Step 2: Lay the face-frame (with doors
attached) face down on a smooth level
surface. Align the side panel with the
groove in the back of the face frame.
Ensure that the camlocks engage the
pre-inserted dowels. With a screwdriver
tighten the camlocks. Do not over-tighten!

Step 3: Repeat Step 2 for the other side
panel. Make sure the camlocks are secure.

Step 4: Slide the top/bottom panel into
the grooves in the side panels. Make sure
the panel fits into the groove in the back
of the face-frame.

Step 5: With a screwdriver, tighten the
camlocks to secure the top/bottom panel
in place. Do not over-tighten!

Step 6: Repeat Step 5 for the other
top/bottom panel. Make sure the camlocks
are secure.

Step 7: Install the back panel, again making
sure the camlocks engage the pre-inserted
dowels.

Step 8: With a screwdriver, tighten the
camlocks. Do not over-tighten!

Step 9: With a screwdriver, screw the back
panel in place to complete the cabinet
assembly!

Step 10: Insert the locking shelf supports
in the locations where you desire shelves.

Step 11: Install the shelves by inserting
one side into the locking support and then
"snapping" the other side in place.

Step 12:Your wall cabinet is now complete!
We recommend installing all your cabinets
before installing the adjustable shelves.

Step 13: Familiarize yourself with all the
drawer components before you start
assembly

Step 14: Take the drawer front and back
panels and add a drop of white wood glue
(Elmer's or similar) to each of the
dovetails

Step 15: Insert the two drawer sides to
the drawer back panel, by aligning the
"dovetails".

Step 16: Ensure that the dovetail joints
are tight and flush.

Step 17: Slide the drawer bottom panel
into the grooves in the drawer sides back
panel.

Step 18: We recommend using a hot glue
gun along the bottom of the draw bottom
to prevent the draw bottom from moving
over time.

Step 19:Attach the front panel and ensure
that the drawer box is square and the
dovetail joints are tight. Remove any
excess glue with a damp cloth.

Step 20: We recommend clamping the drawer
while the glue sets up. You can use bar
clamps or "Quick Grips".

Step 21: Lay all the panels on a clean flat
surface and familiarize yourself with all
the components.

Step 22: Lay the face-frame (with doors
attached) face down on a smooth level
surface. Align the side panel with the
groove in the back of the face frame.
Ensure that the camlocks engage the
pre-inserted dowels. With a screwdriver
tighten the camlocks. Do not over-tighten!

Step 23: Repeat Step 22 for the other side
panel. Make sure the camlocks are secure.

Step 24: Slide the bottom panel into the grooves in the side panels. Make sure the panel fits into the groove in the back of the face-frame.

Step 25: Install the toe kick panel by
inserting the plastic dowels into the
camlocks.

Step 26: With a screwdriver, tighten the
camlocks to secure the toe kick in place.
Do not over-tighten!

Step 27: Install the back panel, again
making sure the camlocks engage the
pre-inserted dowels.

Step 28: With a screwdriver, tighten the
camlocks to secure the back panel in place.
Do not over-tighten!

Step 29: With a screwdriver and the screws
provided, install the drawer guide support
brackets in the back of the cabinet (holes
are pre-drilled).

Step 30: With the locking shelf supports
provided, install the adjustable shelf at
the desired location in the cabinet.

Step 31: Insert the drawer guide into the
bracket at the back of the cabinet and
attach it to the face-frame with the
screws provided.

Step 32: Repeat Step 31 for the other
drawer guide.

Step 33: With a screwdriver and the screws
provided, install the corner support
brackets.
Your base cabinet is now assembled.
All that remains is finishing the drawers.

Step 34: Once the glue has cured and the
drawer box is complete, you can attach
the drawer front using the screws
provided.

Step 35: Ensure the drawer front is
aligned correctly before tightening
the screws

Step 36: Attach the drawer runners with
the screws provided. Make sure that the
runner member is tight against both the
drawer side and front panel.

Step 37: You can now insert the drawer by
aligning the drawer runners in the drawer
guides.

Step 38:Your base cabinet is now complete!